Intelligent equipment Drilling fluid shaker

　　Equipment Manufacturing System for Intelligent Petroleum Drilling Engineering Machinery and Equipment Oilfield drilling fluid shaker Characteristics and features of the manufacturer:

　　1. Intelligent equipment: The intelligent control system of the oilfield drilling fluid shaker eliminates manual operation, features high vibration and compression resistance (which can be adjusted), and can meet the separation requirements for low-viscosity, high-proportion mud;

　　2. The sealant strip for the mesh screen is custom-designed and manufactured, making disassembly, reassembly, and installation convenient.

　　3. The screening box has already been given its overall external shape;

　　4. The screening box undergoes overall heat treatment, enabling long-term operation under high vibration and compressive strength conditions;

　　5. Wedge-type mesh screen clamping device, conducive to efficient removal and replacement of the mesh screen;

　　6. The slurry-inlet Büchner funnel shall be of either back-mounted or top-mounted configuration, enabling gentle slurry retention and uniform flow distribution while minimizing impact on the screen mesh.

　　7. Rapid cuttings transport rate and relatively high processing capacity;

　　The submersible slurry pump features a single-stage, single-suction cantilever design, with pedestal-mounted bearings and a rubber-sleeve coupling that connects the pump’s hydraulic components. The liquid is discharged through the discharge pipe assembly. The pump’s centrifugal impeller is a semi-open type, equipped with agitator blades at the inlet widening of the impeller blades. A key feature of this pump is that its submersible shaft exhibits sufficient bending stiffness, and no rolling bearings are installed between the impeller and the pump casing; moreover, it does not employ a mechanical seal. This pump is also capable of handling slurries containing solid particles at relatively high concentrations.

　　The importance of submersible slurry pumps in oilfield drilling solids control systems:

　　(1) The drilling fluid, which has been substantially desanded by the mud shaker, is pumped into a hydrocyclone desander or desilter at a specified pressure and flow rate to further reduce the sand content in the drilling fluid;

　　(2) Act as a grouting pump to inject slurry and drilling fluid; oilfield drilling fluid shaker

　　(3) It works in conjunction with water jet mixing equipment to intensify and configure drilling fluid. During operation, the body of this column-type sand pump is immersed in the drilling fluid, and its sealing mechanism is a non-contact labyrinth seal, which effectively overcomes the long-standing challenge of sealing in sand pumps. Oilfield drilling fluid shaker

　　The LSB series submersible slurry pumps are vertical, single-stage, single-suction centrifugal pumps with a cantilever design. They are constructed from wear-resistant aluminum alloy and are capable of handling highly concentrated particulate slurries. The standard submergence depth is 1.3 m or 1.5 m, with custom lengths available upon request. Neither the impeller nor the pump casing is equipped with rolling bearings or mechanical seals, resulting in a maintenance-free, heat-resistant submersible slurry pump. These pumps are ideal for supplying slurry to centrifugal dewatering units and for delivering slurry from slurry tanks to vibrating screens within slurry systems. They can also serve as feed pumps for desanders and desilters.